Visit our Ebay store
for more products
Visit Calvert Racing Suspensions
for more products
Fuel Injector Seat AdaptersSuit Nissan SR20 With Aftermarket Fuel Rails
$32.89
Comp Cams Hi-Tech Chromoly Pushrods Heat-Treated 5/16'' 8.800'' Length Universal Set Of 16
$206.00
PACEMAKER EXTRACTORS Suit (Holden HK-HG 253-308 V8) 1 5/8'' Primary 3'' Collector Tuned Design
$587.40
Straight Male to Male with 1/8" Port -12AN
Black Finish
$14.37
Male NPT Taper Swivel 90° Hose End 3/4" to -16AN
Silver Finish. Suit 100 & 450 Series Hose
$37.60
570 Series One-Piece Full Flow 120° Hose End -12AN
Silver Finish. Suit 200 Series PTFE Hose
$45.98
150 Series Taper One-Piece Full Flow Swivel 180° Hose End -6AN
Silver Finish. Suit 100 & 450 Series Hose
$27.81
PET Flex Braid Heat Sleeve
7.6 Meter, Up TO 1-1/2" I.D, Tight Weave High Coverage
$66.42
Edelbrock Victor 18deg 4150
$695.00
Fabricated Square Radiator Expansion Tank - Polished
1.18 litre capacity, 16 psi cap, accepts 2 x 8 ORB fittings, 4.52" W x 2.95" D x 5.51" H
$169.69
Visit our Ebay store
for more products
45° NPT to Male Flare Adapter 3/8" to -10AN
Black Finish
$16.07
WELD 788P-510206DBMT ALUMASTAR 2.0, 15" X 10", 5 X 4.50" BC, 3.00" BS, FORD, CHRYSLER (POLISHED)
$1,428.00
90° NPT to AN Full Flow Adapter 1/2" to -12AN
Black Finish
$22.22
MSD-828783 MSD Pro Power Coils, Ignition Coil, MSC II Coil Pack, GM LS2/LS7 (Black) Set of 8
$825.00
AF85-2200AS Aluminium 20 Gallon (76L) Fuel Cell with Cavity/Sump & Fuel Sender
20-1/16" L x 24-3/8" W x 10-1/4" H (51cm x 62cm x 26cm)
$581.00
400 Series Push Lock 180° Hose End -12AN
Silver Finish. Suits 400 Series Hose
$37.60
90° Female/Male Flare Swivel -6AN
Silver Finish
$18.03
Motive MOT-F890325 Motive Gear Ring and Pinion, 3.25 Ratio, For Ford, 9 in., Set
$456.00
Barb EFI Fuel Pump Adapter M10 x 1.0mm to 3/8"
Silver Finish
$8.25
Microswitches with Spiral Cords, Switch, Push Button, Momentary, Trans-Brake, Plastic, Red, 10 Amps, with Spiral Cord, Each
$157.00
These handy adapters are great for all of our tanks, fuel rails and regulators no more messing around with tapered threads.
© Competition Engines 2010-2024