-
Visit our Ebay store
for more products
-
Visit Calvert Racing Suspensions
for more products
-
90° Male NPT Full Flow Swivel Hose End 1/2" to -10AN
Blue/Red Finish$32.00
-
MOROSO MOR-64929 Moroso Throttle Return Springs (Dual)
$13.00
-
Aluminium Crush Washers (10 Pack)
16.25mm I.D$12.52
-
Billet 4 Port A/C Bulkhead (Black)
Square 3 x -10, 1 x -6$97.79
-
Reinforced Clear PVC Breather Hose 1/2" (12mm) I.D
15 Meter Length$101.88
-
MSD-8558 MSD Crank Trigger Distributor, Chev BB Tall Block, Low-profile, Bronze Gear, Must Be Used With MSD 6, 7 or 8-series ignition and a crank trigger.
$478.00
-
Alloy AN Banjo Fitting 14mm to -4AN
Silver Finish$19.43
-
Replacement O-ring and Bolts for Aeroflow Billet Thermostat Housing
Suit AF64-2034, Chevy & Chrysler, 90° swivel$7.01
-
AFR-1050 HR Eliminator 23 deg Racing Heads 210cc Intake, 75cc Chamber, UPGRADED With 8019 Valve Springs For Hydraulic Roller Cam, Chev S/B
$3,114.00
-
100 Series Swivel Taper 180° Hose End -8AN
Black Finish. Suit 100 & 450 Series Hose$34.80
-
Visit our Ebay store
for more products
-
150 Series Taper One-Piece Full Flow Swivel 60° Hose End -10AN
Blue/Red Finish. Suit 100 & 450 Series Hose$29.21
-
NPT Pipe Reducer 3/4" to 1/2"
Blue Finish$20.82
-
MSD-8600 Crank Trigger SBC 6 Chev
$410.50
-
100 Series Swivel Taper 30° Hose End -12AN
Silver Finish. Suit 100 & 450 Series Hose$40.39
-
Cushioned P-Clamps 1-3/4" (44.5mm)
Silver Finish, 5 Pack$25.01
-
Black Valve cover Breather
Push In, With 5/8" Spout$5.39
-
-20 AN Water Neck Adapter - Red
Suits 360° Swivel Aeroflow Water Necks$22.18
-
COMP CAMS HI-TECH PUSHRODS SUIT 351c 8.400-5/16 (One Piece .080 Wall Chromemoly)
$249.00
-
NPT to Straight Male Flare Adapter 3/4" to -10AN
Blue Finish$6.85
-
MagnaFuel MP-3504 - MagnaFuel Carburetor Inlet Fittings
$26.00
- No News
All Romac Harmonic Balancers are SFI 18.1 spec approved. They are offered in four styles. Most are 360 degreed with a fully encapsulated outer ring via a shoulder at the rear and a serviceable circlip mounted at the front of the outer ring. All Romac Balancers are individually “Consecutively Marked”, fully serviceable and need no special bonding with the elastomer.