-
Visit our Ebay store
for more products
-
Visit Calvert Racing Suspensions
for more products
-
Sacrificial Zinc Anode 1/4" NPT Plug
insert to control electrolysis in cooling systems.$15.24
-
ARP ROD BOLT EXTENSIONS Suit 5/16
$50.00
-
HOLLEY EFI BIG WIRE COIL-NEAR-PLUG SMART COIL KIT
$1,108.00
-
550 Series Cutter Style One Piece Swivel 120° Stepped Hose End -16AN to -12 Hose
Silver Finish. Suits 100 & 450 Series Hose$62.76
-
Crower Severe-Duty Solid Roller Lifters With High Pressure Pin Oiling .874dia Suit Ford V8 FE 390-427 CRW-66216H-16
$1,016.00
-
MECHMAN ALTERNATOR 170 AMP S-SERIES CHEV (GM) 1 WIRE HOOK UP (POLISHED)
$946.00
-
Metric to Male Flare Adapter M22 x 1.5mm to -6AN
Blue Finish$13.84
-
Stainless Steel Billet Breather with -8AN Female Thread
Black Finish.$53.11
-
MSD-83523 MSD Pro-Billet Ready to Run Distributor (Black), To Suit Ford Windsor 289 & 302
$920.00
-
45° Full Flow AN Union -6AN
Black Finish$9.65
-
Visit our Ebay store
for more products
-
570 Series One-Piece Full Flow 30° Hose End -10AN
Blue/Red Finish. Suit 200 Series PTFE Hose$39.00
-
90° NPT to Male Flare Adapter 1/2" to -10AN
Silver Finish$16.63
-
Replacement Air Tank Hose
Suit Aeroflow 5 & 10 Gallon Air Tanks$10.89
-
Male to Male Barb Push Lock Adapter -6 to -8
Blue Finish$9.65
-
90° AN Bulkhead -12AN
Black Finish$36.20
-
ARP 100-7503 Valve Cover Bolts, Chromoly, Black Oxide, 12-Point, 1/4 in.-20 Diameter, Cast Aluminum Covers, Set of 8
$17.00
-
Kryptalon Series Ultra-Light Flexible Kevlar Braided Hose -12AN
30 Metre Length$2,603.59
-
Intake Bellmouth
4" Mount x 6" O. D, Polished Suit Turbo Or Intake Pipe$49.39
-
Straight AN Bulkhead -4AN
Blue Finish$6.01
-
Throttle Cable Bracket & Spring
$25.88
- No News
MAKE: CHRYSLER
Models: VC VALIANT, AP5*, AP6*
Body: SEDAN. WAGON
Engine: V8 340, 360
TUFF MOUNTS Designed to suit 340-360 V8 engines to be fitted to VC Valiant’s with the Slant 6 K frame.
TUFF MOUNTS are a direct bolt up fitment.
These do not sit engine in standard location, See notes at bottom of page
No Adaptors required.
The Highest Quality Steel and Polyurethane Bushes provide the ultimate transfer of your engines power to the chassis.
TUFF MOUNTS are DIY or get your mechanic to fit.
Pro Series – Hand Made & Finished to the highest standard, Powder Coated Gloss Black, Specifically Developed Red Urethane Bushes.
Our premium product for high performance & show.
Proudly made in South Australia using Australian products.
*Please Note
Designed for 340-360 V8 engines to be fitted to VC Valiant’s with Slant 6 K frames May fit AP5-AP6 Valiant’s but modifications may be required.
Designed to work with Pacemaker PH2555 Extractors and Block Huggers also work very well.