EDL-2194 EDELBROCK PERFOMER HOLDEN 308 QUADRAJET

Visit our Ebay store

for more products
Visit Calvert Racing Suspensions

for more products
23° Silicone Hose Elbow 3" (75mm) I.D
Gloss Blue Finish. 4-59/64" (125mm) Leg

$28.36
AN Flare Reducer Female/Male -10AN to -8AN
Blue Finish

$12.44
AUTOMETER 4732 2-1/16" WATER TEMPERATURE, 120-240 Â°F, 6 FT., MECHANICAL, CARBON FIBER

$225.00
EDL-2916 EDELBROCK BBC SUPER VICTOR MANIFOLD

$529.00
PACEMAKER EXTRACTORS Suit (Commodore VE V8 6.0 Litre Gen IV LS2) 1 3/4'' TRI-Y Design

$669.90
45° NPT Female to Male NPT Fitting 1/2"
Black Finish

$20.82
Y-Block with Female Swivel -10AN Inlet to 2 x -8AN Outlets
Black Finish

$45.98
Push-On EFI Fuel Fitting 3/8" Hose Pressure Side
Silver Finish

$19.43
COMP CAMS ELECTRIC VACUUM PUMP KIT

$429.00
Alloy AN Banjo Fitting 14mm to -6AN
Silver Finish

$19.43
Visit our Ebay store

for more products
MOROSO MOR-63924 Moroso Vacuum Pump Mounting Bracket GM LS-Series Engines, For Enhanced Design Pumps

$134.00
PACEMAKER EXTRACTORS Suit (Falcon XA-XF 460 BBF) 2'' Primary 2 1/4'' Collector TRI-Y Design

$1,149.00
90° NPT to Male Flare Adapter 1/8" to -3AN
Black Finish

$8.25
STREET TERRA FORD V8 WINDSOR STREET TERRA 5/16" SHAFT [1.6 RATIO] ADJ ROCKERS (EF) (ST2047)

$769.00
Stainless Steel Weld-On Male AN Fitting -4AN

$8.72
Stainless Steel Inverted Flare Tube Nut
7/16"-24 to 3/16" Hard Line

$9.65
23° Silicone Hose Elbow 3-1/8" (80mm) I.D
Gloss Blue Finish. 4-59/64" (125mm) Leg

$24.66
Billet Y-Block with 1/8" NPT Port - 10 ORB Inlet, -8 ORB Outlets
Black Finish

$41.79
AN Female to Male Extension -6AN to -6AN
Black Finish

$9.65
Billet Aluminium Dual Hose Separators
9/16" I.D., Blue Finish

$12.57

No News

EDL-2194 EDELBROCK PERFOMER HOLDEN 308 QUADRAJET

EDL-2194

Brand:

Edelbrock

Manufacturer's Part Number:

2194

Part Type:

Intake Manifolds, Carbureted

Product Line:

Edelbrock Performer Intake Manifolds

Part Number:

EDL-2194

UPC:

085347021949

Intake Section Included:

Complete

Engine Block Deck Height:

Standard deck

Carburetor Quantity:

One

Intake Style:

Dual plane

Basic Operating RPM Range:

Idle-5,500

Intake Manifold Height:

3.960 in.

Intake Finish:

Natural

Intake Material:

Aluminum

EGR:

Quantity:

Sold individually.

Notes:

Includes Edelbrock square-bore carb adapter plate. Fits 253, 304, or 308 c.i.d. Holden V8 engines with carbureted style heads. Do not use high performance or competition intake gaskets. Pilot holes on the exhaust crossover may need drilled out depending on application. Accepts both square-bore and spread-bore carbs

Special Attention:

Manifold height: A-3.25 in., B-4.67 in.; Carb pad height: 3.96 in. Port exit dimensions: 1.07 in. x 1.83 in.

Edelbrock Performer Intake Manifolds

Edelbrock Performer intake manifolds are low-rise, dual-plane designs with patented runner tuning and a 180 degree firing order that you won't find with the competition. This combination boosts torque over a wide rpm range, from idle to 5,500 rpm. These manifolds also deliver improved throttle response over stock intakes and are available in both EGR and non-EGR style.

Account

Hours of operation