-
Visit our Ebay store
for more products
-
Visit Calvert Racing Suspensions
for more products
-
45° NPT to AN Full Flow Adapter 3/8" to -8AN
Blue Finish$11.04
-
CENTERLINE AUTO DRAG 15 x 10'' 4-7/8'' Rear Spacing ( 5 x 4-1/2'' Bolt Circle)
$599.00
-
HOLLEY EFI 3.5 BAR MAP SENSOR
$210.00
-
Tee with NPT On Side 3/8" to -6AN
Black Finish$13.84
-
MSD-8580 MSD Billet Distributor, Iron Gear, Ford 351C, 351M, 400, 429, 460, Must Be Used With MSD 6, 7 or 8 Series Ignition.
$448.00
-
Billet EFI Fuel Rails (Polished)
Suit Nissan RB30$174.12
-
Billet Throttle Stop
Black Anodised (Cut To Length)$33.14
-
45° NPT to AN Full Flow Adapter 3/8" to -6AN
Silver Finish$12.44
-
Fabricated Power Steering Tank
Suit BA, BF & FG V8 & XR8 Only, Black Finish$169.00
-
100 Series Stainless Steel Braided Hose -12AN - Black
30 Metre Length$1,160.39
-
Visit our Ebay store
for more products
-
Male NPT Taper Swivel 90° Hose End 1/8" to -6AN
Blue/Red Finish. Suit 100 & 450 Series Hose$22.22
-
Male NPT to Adapter 3/8" to -8AN with 1/8" Port
Black Finish$11.61
-
Knights of Thunder Series T-Shirt
Youth (Medium)$0.00
-
90° NPT Swivel to Male AN Flare Adapter 1/8" to -6AN
Black Finish$20.82
-
PRO SYSTEMS PS-1040BLK 1040cfm (4150) BLACK
$1,963.00
-
HOLLEY EFI DOMINATOR EFI ECU
$3,017.00
-
Replacement Cap O-Ring
Suit AF465-32$13.18
-
90° NPT Female to Male NPT Fitting 1/8"
Blue Finish$11.95
-
Moroso Fuel Bowl Screw Gaskets Nylon For Holley
$12.00
-
Male AN Taper Swivel Straight Hose End -12AN to -12AN
Black Finish. Suit 100 & 450 Series Hose$36.20
- No News
CALTRACS HD TRUCK (7110)
1997-2004 Ford F-150/Lightning
Designed especially for HD trucks. Bolt On traction system. Full pre-load adjustability, keeps axle from rotating/maintains pinion angle, eliminates spring wrap up, improves 60′ times. Black powder coated. Berlin-style pivot plates for most applications.
Specializing in leaf spring traction systems since 1995, the Calvert Racing Team knows what it takes to get your truck hooking harder than ever whether you’re drag racing, sled pulling or just towing. Helps eliminate wheel hop. Designed by racers for racers, CalTracs boasts unsurpassed quality and craftsmanship; the competition is eliminated right off the starting line. The preload link is made with Chromoly, lightweight but strong, ensuring maximum leverage and minimum flex. HD Rod Ends have a radial static load capacity of over 14,000 pounds. Two-piece aluminum front spring eye bushings assembly keeps the front pivot squared and rigid. The rear mounts are made with 5/16” mild steel to withstand the correct torque on your u-bolts, keeping the rear end from moving.
This kit requires and INCLUDES a set of square u-bolts.
FULL COLOR INSTALLATION GUIDE INCLUDED.
NOTE: Your final product may vary from photo depending on your application. Some applications require additional hardware.