-
Visit our Ebay store
for more products
-
Visit Calvert Racing Suspensions
for more products
-
MOROSO 93050 BLUE VALVE
$119.00
-
Billet Timing Pointer - Blue
Suit Ford 302-351C$42.78
-
3" Billet Aluminium Filler Cap
Black Finish$47.38
-
23° Silicone Hose Elbow 3-3/4" (95mm) I.D
Gloss Blue Finish. 4-59/64" (125mm) Leg$31.61
-
550 Series Cutter Style One Piece Swivel 90° Stepped Hose End -6AN to -8 Hose
Black Finish. Suits 100 & 450 Series Hose$33.41
-
Straight AN Male Flare Adapter to ORB -10AN to -12 ORB
Black Finish$13.00
-
Reinforced Clear PVC Breather Hose 1/2" (12mm) I.D
15 Meter Length$101.88
-
Barb Adapter M18 x 1.5mm to 5/16"
Blue Finish$9.65
-
45° NPT to Male Flare Adapter 1" to -16AN
Blue Finish$44.96
-
BSPP Tapered To AN Male Adapter
1/2quot; to -8AN, Black Finish$6.04
-
Visit our Ebay store
for more products
-
AeroFlow Air Cleaner Recessed Base Black 14''
$29.99
-
WELD 784B-508210 V SERIES 15" X 8.0", 5 X 4.50" BC, 5.00" BS, FORD, CHRYSLER (BLACK)
$690.00
-
AUTOMETER 4451 2-5/8" TRANSMISSION TEMPERATURE, 140-280 °F, MECHANICAL, ULTRA-LITE
$196.00
-
CC-410M - COMP Cams Melonized Distributor Gears
$149.00
-
Straight Silicone Hose Reducer 1" - 45/64" (25-16mm) I.D
Gloss Blue Finish. 5" (127mm)$7.73
-
Male NPT Taper Swivel 90° Hose End 1/4" to -6AN
Silver Finish. Suit 100 & 450 Series Hose$22.22
-
Black Clamp On Breather With Black Shield
3" (76.2mm) O.D. x 2-1/2" (63.5mm) High, 1-3/8" (34.9mm) Flange Inside Diameter$30.69
-
Carburettor Adapter - Female -8AN
Black Finish. Suit Holley$24.87
-
AUTOMETER 4413 2-5/8" FUEL PRESSURE W/ ISOLATOR, 0-15 PSI, MECHANICAL, ULTRA-LITE
$351.00
-
Tee with NPT On Side 1/4" to -4AN
Silver Finish$11.04
- No News
Reid Racing Bellhousings
Reid Racing bellhousings are cast from high-strength 6061 T-6 aluminum and are heat-treated for additional toughness. These bellhousings pass stringent SFI 30.1 certification and are approved with no external shields required. The bellhousings feature an open bottom for easy converter access, a reduced diameter for better floorboard clearance, and a contoured mounting flange to properly match the rear of the engine block. No special flexplate is required. They are available for the Reid Racing Superglide and Super Hydra 400 transmissions.