Visit our Ebay store
for more products
Visit Calvert Racing Suspensions
for more products
45° ORB to Male AN Full Flow Adapter -8 ORB to -10AN
With Jam Nut, Blue Finish
$18.03
45° ORB to Male AN Full Flow Adapter -10 ORB to -8AN
With Jam Nut, Blue Finish
$18.03
Stainless Hose Clamp 33-57mm
10
$13.38
Stainless Steel Hard Line 1/4" (6.35mm)
25ft (7.5m) Length Roll
$93.04
510 Series Full Flow Tight Radius Push Lock 120° Hose End -12AN
Black Finish. Suit 400 Series Hose
$40.39
YELLA TERRA CHEVROLET V8 SMALL BLOCK PLATINUM 7/16" ROCKERS, RATIO 1.6 YT 6704
$1,316.00
90° NPT Swivel to Male AN Flare Adapter 1/2" to -10AN
Black Finish
$34.21
Lucas Semi-Synthetic Automatic Transmission Fluid 18.9Lt
$132.00
880 Elite Series Full Flow Cutter Swivel 60° Hose End -16AN
Suits 100 & 450 Series Hose
$68.48
90° Male NPT to Female AN Adapter 1/8" to -3AN
Blue Finish
$19.13
Visit our Ebay store
for more products
Straight -4AN Female to Male with 1/8" NPT Port
Stainless Steel
$20.82
Aluminium 15 Gallon (57L) Fuel Cell Flat Bottom Triple Pump Hanger & Fuel Sender
18-1/8" L x 20-1/16" W x 10-1/4" H (46cm x 51cm x 26cm)
$714.89
AUTOMETER 6549 2-1/16" TRANSMISSION TEMPERATURE, 0-340 °F, ULTRA-LITE DIGITAL
$165.00
ASR OPA-1102SS-GM SUPER STREET OIL PAN HOLDEN V8 (SUIT GURDLE) VB-VT Commodore
$649.00
MT-3054ST Mickey Thompson ET Drag Slick 28 x 9.0 x 15 M5 Compound, Stiff Sidewall, Designed for Manual Transmission Applications
$269.00
MSD-84313 MSD Distributor Cap for PN 8570, 8545, 8546, Male HEI , Small Diameter (Black)
$119.00
100 / 150 Series Taper Style One Piece Full Flow Swivel Straight Hose End -6AN
Blue/Red Finish. Suit 100 & 450 Series Hose
$10.05
Steel Weld-On Male AN Fitting -10AN
$6.42
Steel Weld-On Male AN Fitting -6AN
$4.48
MOROSO MOR-65800 Carby Top Tool Tray, Rubber Mat Fits 5 1/8" Diameter, Size 10" x 13"
$188.00
Aeroflow's Braided Sleeve Heat Shield insulates hoses and cables in high heat areas. Withstands up to 932°F / 500°C and splashes of 2000°F / 1100°C. Not recommended for direct contact with heat source. Available in 1m (3ft) or 3.7m (12ft) lengths
© Competition Engines 2010-2024