- Aeroflow Fittings, Hoses & Turbo Accessories (9518)
-
Visit our Ebay store
for more products
-
Visit Calvert Racing Suspensions
for more products
-
400 Series Push Lock 90° Hose End -6AN
Silver Finish. Suits 400 Series Hose$21.84
-
200 / 570 Series PTFE Straight Hose End -6AN
Blue/Red Finish. Suit 200 Series Hose$12.44
-
WELD 788B-510208 ALUMASTAR 2.0, 15" X 10.0", 5 X 4.50" BC, 4.00" BS, FORD, CHRYSLER (BLACK)
$702.00
-
550 Series Cutter Style One Piece Swivel 150° Stepped Hose End -6AN to -8 Hose
Silver Finish. Suits 100 & 450 Series Hose$41.79
-
PACEMAKER EXTRACTORS Suit (Holden HQ-WB 283-400 SBC) 1 3/4'' Primary TRI-Y Design
$614.90
-
COMPETITION ENGINEERING Lower Coil Over Shock Mount Kit
$159.00
-
Cushioned P-Clamps 5/8" (15.8mm)
Suit -10 PTFE & -8 Braid hose, Black Finish, 5 Pack$20.82
-
Stainless Steel Inverted Flare Tube Nut
M10 -1.0mm to 3/16" Hard Line$9.65
-
CHEVROLET SMALL BLOCK & BIG BLOCK V8 168 TEETH LIGHTWEIGHT NEUTRAL BALANCE (YT9901L)
$450.00
-
Kryptalon Series One Piece Full Flow Swivel 180° Hose End -10AN
Titanium Finish, Suits Kryptalon Series Kevlar Hose$35.70
-
Visit our Ebay store
for more products
-
550 Series Cutter Style One Piece Swivel 45° Stepped Hose End -10AN to -8 Hose
Blue/Red Finish. Suits 100 & 450 Series Hose$36.20
-
ARP 134-1504 LS1,2 Rear Motor Cover Bolts 12 Point Chromoly Black Oxide Kit
$47.75
-
2-1/2" Stainless Steel Weld-On Neck (Neck Only)
No Cap Included$111.66
-
Straight Female Swivel Coupler -16AN
Silver Finish$22.22
-
Adjustable Grip AN Wrench Kit
3-1/2" & 4-1/2" handle, Blue finish$160.91
-
NPT Plug 1"
Blue Finish$9.65
-
ARP ENGINE & ACCESSORY FASTENER KIT SUIT LS1 GEN 3, 12 POINT STAINLESS POLISHED BOLTS WITH STOCK OR HEADER MANIFOLDS
$635.00
-
Billet Radiator Cap Cover
Suit Small Cap, Purple Finish$19.43
-
90° Full Flow AN Bulkhead -10AN
Blue Finish$16.63
-
Hex Hose Finisher 13/16" (20.6mm) Inside Diameter
Red Finish. Suits -10AN Hose$9.01
- No News
10-1/4" L x 11-13/16" W x 10-1/4" H (26cm x 30cm x 26cm)
- High Grade Aluminium: 3.0mm thickness
- Robot Welded: The fuel cell has been welded solely by a high level machine robot the quality of which can be seen by the clean corner welds.
- Internally baffled: The fuel cell incorporates internal baffling to be Ethanol & Methanol safe.
- Fuel Pick-Up Point: As can be seen in the photo, The fuel OUT fittings are in a cavity at the base of the cell, which helps prevent fuel starvation at low fuel levels even under high G-force levels.
- Fuel Inlet / Outlet Fittings: The fuel cell incorporates all -12 ORB female threads for use in all applications. 2 X pickups and 2 X returns or 1 X return and 1 X rollover. For a bolt in Roll-Over valve use Part AF614-08.
- Flush Cap: Designed for fast cap removal with a flip up and twist action CNC billet polished alloy cap with a 1 way air valve in the cap.
- Mounting